Energy independence starts here

A Tulikivi masonry heater is made from Finnish soapstone, an exceptionally dense stone that absorbs the intense heat of a rapid burn, then releases it slowly and evenly over 12 to 24 hours. Unlike a conventional stove that heats air by convection, the Tulikivi radiates gentle, deep warmth — similar to the sun — warming walls, floors, and bodies.

One to two fires a day are enough, even in the coldest Québec winters. Each burn lasts about 2 to 3 hours, but the soapstone continues to release heat for 12 to 24 hours after the fire goes out. It's one of the most practical advantages of a masonry heater: less monitoring, less wood, more freedom.

A Tulikivi fireplace uses significantly less wood than a traditional slow-combustion stove while delivering better heat distribution. Its thermal efficiency reaches up to 90%, meaning nearly all the energy in the wood is converted to usable heat. You save considerably on your wood supply throughout the heating season.

Yes. In a well-insulated home, a properly sized Tulikivi fireplace can be your primary heat source. For larger homes or older builds, it works very well as a supplement to another system. We help you choose the right model for your home's size and characteristics.

Yes, Tulikivi fireplaces are prefabricated units that install in both new and existing homes. Installation typically takes 1 to 3 days. Floor reinforcement may be needed for some models due to the stone's weight, along with an appropriate chimney. The lighter Jero line can be installed on any floor type. An assessment visit is recommended before planning the work.

Yes. All Tulikivi fireplaces sold in Canada are ULC certified (Underwriters Laboratories of Canada), the safety standard recognized across Canada. This certification simplifies approval by building inspectors and streamlines the process with insurers. It's a significant advantage for installation in Québec.

Absolutely. Wood is a renewable, carbon-neutral energy source: the CO2 released during combustion equals what the tree absorbed during growth. The Tulikivi's high efficiency (up to 90%) also minimizes fine particle emissions, well below Canadian environmental standards. It's one of the most ecological heating methods available.

A Tulikivi fireplace is built to last generations. Soapstone doesn't wear down over time and the structure is guaranteed for life by the manufacturer. Several fireplaces installed in the 1980s are still working perfectly today. It's a one-time investment for the lifetime of your home — and beyond.

Maintenance is minimal: chimney sweeping once a year, ash cleaning roughly once a week during heating season, and occasional joint inspection. The soapstone itself requires no special care. No mechanical parts, no filters, no motors — total simplicity.

The initial investment is higher than a conventional stove, but the comparison ends there. Unlimited lifespan, reduced wood consumption, no parts to replace, lifetime structural warranty — the Tulikivi quickly becomes more economical over the long term. Contact us for a personalized estimate based on the model and your situation.